| all components > standoffs and remote powerfeeds > powerfeeds for suspended standard track
| Powerfeeds for Suspended Standard Track
Various powerfeed options for track systems suspended from ceiling.
|
End powerfeed for suspended systems (HBXLEBK) - Allows power to be fed from shielded power cables. This end powerfeed accepts 'BX' or Romex cable drops for exposed wire installs. Used when feeding power through the standoffs is not practical since junction box is not available or flush within the ceiling surface...common in solid concrete ceilings.
| metallic finish
black | for use with:
H-Type Track (black)
number of circuits supported:
1 circuit
maximum wattage (per circuit):
1900 watts at 120 volts | made by:
WAC Lighting
price as shown:
normally: $23.00
our price: $16.49 | 
view large | |
End powerfeed for suspended systems (HBXLEWT) - Allows power to be fed from shielded power cables. This end powerfeed accepts 'BX' or Romex cable drops for exposed wire installs. Used when feeding power through the standoffs is not practical since junction box is not available or flush within the ceiling surface...common in solid concrete ceilings.
| metallic finish
white | for use with:
H-Type Track (white)
number of circuits supported:
1 circuit
maximum wattage (per circuit):
1900 watts at 120 volts | made by:
WAC Lighting
price as shown:
normally: $23.00
our price: $16.49 |
view large | |
Live end connector for suspended systems (HLEBK) - Allows power to be fed into the end of a track system. Use this choice for suspended systems when power will be run through the standoff supports. This typically requires that the standoffs be installed over a junction box...common with standard and acoustic tile ceilings.
| metallic finish
black | for use with:
H-Type Track (black)
number of circuits supported:
1 circuit
maximum wattage (per circuit):
1900 watts at 120 volts | made by:
WAC Lighting
price as shown:
normally: $13.00
our price: $9.53 | 
view large | |
Live end connector for suspended systems (HLEWT) - Allows power to be fed into the end of a track system. Use this choice for suspended systems when power will be run through the standoff supports. This typically requires that the standoffs be installed over a junction box...common with standard and acoustic tile ceilings.
| metallic finish
white | for use with:
H-Type Track (white)
number of circuits supported:
1 circuit
maximum wattage (per circuit):
1900 watts at 120 volts | made by:
WAC Lighting
price as shown:
normally: $13.00
our price: $9.53 |
view large | |
|
